PPWR Article 7 · research beta
BTL-500 (example)
Assessed against ruleset 0.6.0, compiled 2026-10-05. Regulation 32025R0040.
1 component was treated as exempt, so the recycled-content requirements were not tested against it.
- label — Article 7(5)(b): this component weighs less than 5 % of the packaging unit you entered
This one follows from the weights you entered, not from an answer. A mistyped total weight is the usual cause of an unexpected exemption here, so check both figures. Note also that Article 7(5)(b) removes the part from the calculation, not the rest of the unit.
Each part at a glance
Where each part stands before the detail below. Percentages are the plant average you entered; a gap is in percentage points.
Article 7 readiness
Nothing is missing from your answers. What remains open is evidence and dates, listed below.
Now: no Article 7 target binds in the reporting year 2026, so no current failure can be concluded.
Still open
- The binding date of the 2030 targets, which depends on the Article 7(8) implementing act.
- Evidence that the recycled content qualifies under Article 7(3): the figure was taken as entered.
- Confirmation of the Annex II type and format grouping: it is not validated.
- Confirmation that the exemption shown above meets its legal conditions.
Next: Start with bottle: 2 points short of the 2030 (date pending) target.
Inputs assessed
Everything below is as you entered it. Items marked * decide results and were taken on trust: the tool could not verify them.
| SKU | BTL-500 (example) |
|---|
| Total packaging weight (g) | 30 |
|---|
| Compostable packaging? * | No |
|---|
| Transport of dangerous goods? * | No |
|---|
| Recycled content would breach food-contact safety? * | No |
|---|
| Medicinal packaging role * | Not medicinal |
|---|
| Medical device, contact-sensitive? * | No |
|---|
| IVD device, contact-sensitive? * | No |
|---|
| Infant / FSMP food, contact-sensitive? * | No |
|---|
| Packaging of supplies or components for manufacturing medicinal products? * | No |
|---|
| Component 1 | bottle · plastic · 26 g · contact-sensitive Yes, beverage bottle Yes, PET major Yes |
|---|
| Component 2 | label · plastic · 1 g · contact-sensitive No, beverage bottle No, PET major No |
|---|
| Component 3 | sleeve · paper · 3 g |
|---|
| Plant | Münster-1 |
|---|
| Reporting year | 2026 |
|---|
| Packaging type and format * | rigid PET bottle |
|---|
| Annual average recycled content this plant supplied to you (%) * | 28 % |
|---|
Did this help you decide what to do next?
This is a research beta, and five short answers shape the next version more than anything else. The questions are already in the mail. It carries the language, the ruleset version and the rules in this report, never your packaging data.
Answer five questions
3 findings to read: 3 future target. 24 requirements do not apply.
What every result below depends onThis is tested as an average per manufacturing plant and year, per packaging type and format (Table 1 of Annex II), not against this SKU. A single SKU cannot pass or fail on its own.
Two inputs are taken as given and not verified. The packaging type and format is free text: Annex II Table 1 is not encoded, so the grouping you entered is not validated against it. And the recycled content percentage is accepted as entered: Article 7(3) sets conditions on where that material must have been collected and recycled for it to count, and the engine is handed a number rather than the evidence behind it. This result holds only if the classification is right and the content qualifies under Article 7(3).
Targets from 2030 (date pending)
Future target · bottle
Recycled content, single-use plastic beverage bottles (2030)
- What this means
- The plant's annual average recycled content is 28%. This requires at least 30%. That is 2 percentage points short of it. This is a target, not a present failure.
- What to do
- Raise the plant's annual average for this type and format to at least 30 %.
- Applies from
- 2030-01-01 (conditional)
- Requirement
- Single-use plastic beverage bottles shall contain at least 30 % recycled content, as a plant-and-year average.
- Source
- Article 7(1)(c)
What this result depends onSame conditional date as PPWR-0002: "1 January 2030 or 3 years from the entry into force of the Article 7(8) implementing act, whichever is the latest". The binding date cannot be computed until that act is encoded.
Also depends on the points stated once above the findings.
Future target · bottle
Recycled content must be documented in the technical information
- What this means
- This is how compliance with the Article 7(1) and 7(2) quotas will have to be shown once they bind, not a duty that stands on its own today. Whether your Annex VII technical information exists and is adequate also cannot be judged from a packaging specification — it is a documentation obligation, not a property of the packaging.
- What to do
- Ensure the Annex VII technical information records the recycled content figures and the method used to calculate them.
- Applies from
- 2030-01-01 (conditional)
- Requirement
- Compliance with Article 7(1) and 7(2) shall be demonstrated by manufacturers or importers in the technical information concerning the packaging referred to in Annex VII.
- Source
- Article 7(6)
Targets from 2040
Future target · bottle
Recycled content, single-use plastic beverage bottles (2040)
- What this means
- The plant's annual average recycled content is 28%. This requires at least 65%. That is 37 percentage points short of it. This is a target, not a present failure.
- What to do
- Raise the plant's annual average for this type and format to at least 65 % before 1 January 2040.
- Applies from
- 2040-01-01
- Requirement
- By 1 January 2040, single-use plastic beverage bottles shall contain at least 65 % recycled content, as a plant-and-year average.
- Source
- Article 7(2)(c)
What this result depends onAlso depends on the points stated once above the findings.
24 requirements that do not apply to this packaging
- Recycled content, contact-sensitive PET (2030) · bottleArticle 7(1)(a)This requirement does not cover this component.
What this result depends onAlso depends on the points stated once above the findings.
- Recycled content, contact-sensitive non-PET (2030) · bottleArticle 7(1)(b)This requirement does not cover this component.
What this result depends onAlso depends on the points stated once above the findings.
- Recycled content, other plastic packaging (2030) · bottleArticle 7(1)(d)This requirement does not cover this component.
What this result depends onAlso depends on the points stated once above the findings.
- Recycled content, contact-sensitive PET (2040) · bottleArticle 7(2)(a)This requirement does not cover this component.
What this result depends onAlso depends on the points stated once above the findings.
- Recycled content, contact-sensitive non-PET (2040) · bottleArticle 7(2)(b)This requirement does not cover this component.
What this result depends onAlso depends on the points stated once above the findings.
- Recycled content, other plastic packaging (2040) · bottleArticle 7(2)(d)This requirement does not cover this component.
What this result depends onAlso depends on the points stated once above the findings.
- Recycled content, contact-sensitive PET (2030) · labelArticle 7(1)(a)This requirement does not cover this component.
What this result depends onAlso depends on the points stated once above the findings.
- Recycled content, contact-sensitive non-PET (2030) · labelArticle 7(1)(b)This requirement does not cover this component.
What this result depends onAlso depends on the points stated once above the findings.
- Recycled content, single-use plastic beverage bottles (2030) · labelArticle 7(1)(c)This requirement does not cover this component.
What this result depends onAlso depends on the points stated once above the findings.
- Recycled content, other plastic packaging (2030) · labelArticle 7(1)(d)Exempt under Article 7(5)(b): this component weighs less than 5 % of the packaging unit you entered.
What this result depends onAlso depends on the points stated once above the findings.
- Recycled content, contact-sensitive PET (2040) · labelArticle 7(2)(a)This requirement does not cover this component.
What this result depends onAlso depends on the points stated once above the findings.
- Recycled content, contact-sensitive non-PET (2040) · labelArticle 7(2)(b)This requirement does not cover this component.
What this result depends onAlso depends on the points stated once above the findings.
- Recycled content, single-use plastic beverage bottles (2040) · labelArticle 7(2)(c)This requirement does not cover this component.
What this result depends onAlso depends on the points stated once above the findings.
- Recycled content, other plastic packaging (2040) · labelArticle 7(2)(d)Exempt under Article 7(5)(b): this component weighs less than 5 % of the packaging unit you entered.
What this result depends onAlso depends on the points stated once above the findings.
- Recycled content must be documented in the technical information · labelArticle 7(6)Exempt under Article 7(5)(b): this component weighs less than 5 % of the packaging unit you entered.
- Recycled content, contact-sensitive PET (2030) · sleeveArticle 7(1)(a)This requirement does not cover this component.
What this result depends onAlso depends on the points stated once above the findings.
- Recycled content, contact-sensitive non-PET (2030) · sleeveArticle 7(1)(b)This requirement does not cover this component.
What this result depends onAlso depends on the points stated once above the findings.
- Recycled content, single-use plastic beverage bottles (2030) · sleeveArticle 7(1)(c)This requirement does not cover this component.
What this result depends onAlso depends on the points stated once above the findings.
- Recycled content, other plastic packaging (2030) · sleeveArticle 7(1)(d)This requirement does not cover this component.
What this result depends onAlso depends on the points stated once above the findings.
- Recycled content, contact-sensitive PET (2040) · sleeveArticle 7(2)(a)This requirement does not cover this component.
What this result depends onAlso depends on the points stated once above the findings.
- Recycled content, contact-sensitive non-PET (2040) · sleeveArticle 7(2)(b)This requirement does not cover this component.
What this result depends onAlso depends on the points stated once above the findings.
- Recycled content, single-use plastic beverage bottles (2040) · sleeveArticle 7(2)(c)This requirement does not cover this component.
What this result depends onAlso depends on the points stated once above the findings.
- Recycled content, other plastic packaging (2040) · sleeveArticle 7(2)(d)This requirement does not cover this component.
What this result depends onAlso depends on the points stated once above the findings.
- Recycled content must be documented in the technical information · sleeveArticle 7(6)This requirement does not cover this component.
Ruleset 0.6.0 · compiled 2026-10-05 · evaluated 2026-11-20 21:32 UTC. Quote these if you need to reproduce this result.
Informational use only. This report is generated from a written set of rules derived from Regulation (EU) 2025/40. It does not constitute legal advice or a legal service within the meaning of the Rechtsdienstleistungsgesetz, and it does not establish or certify compliance. The ruleset may be incomplete and may not reflect later amendments, implementing acts or national law. Verify every result against the official text before relying on it.
← Check another product